2007 2008 2009 2010 2011 Bmw 3 Series 335i Coupe 3.0L, 6 Cyl. Twin Tu Eibach MULTI-PRO-R2 Street Coil-Over Kit (Height & Two-Way Damper Adjustable) Suspension Drop = 0.0" - 2.0" Front - / 0.0" - 1.6" Rear
For the ultimate in tunable suspension performance, Eibach has developed MULTI-PRO-R2 Street Coil-Over Kit (Height & Two-Way Damper Adjustable), specially tuned spring/damper units that allow you to extract the last ounce of cornering power from your 2007-2011 Bmw 3 Series 335i Coupe 3.0L, 6 Cyl. Twin Tu. The R2 Coil-Over design lets you precisely tune the corner weights for optimum handling balance, and the wide range of the damping adjustability lets you tune for the comfort, ultimate grip, or anything in between. These suspension kits are perfect for the club racers or drivers who demand the high performance handling and optimal ride quality for which Eibach is famous.
These state-of-the-art, race-ready, damping-adjustable coil-overs use a monotube damper design for maximum track performance. Ride height is infinitely adjustable between 0.80" - 2.5" lower than stock, and the dual-spring setup is dialed for maximum cornering performance. Rebound and compression damping are both adjusted-ensuring proper damping balance at any setting. To extract maximum performance from your 2007-2011 Bmw 3 Series -look no further than Eibach.
Suspension Kit Breakdown
Part Breakdown A) 10-Way Adjustable Compression Damping—Tunable for Street or Track
B) Adjustable Hard-Anodized Compression Piston
C) Hard Anodized Nitrogen End Cap with Dual Quad O-Ring for a Perfect Seal.
D) High Pressure Schrader Valve for Fine Tuning of Nitrogen Pressure
E) Stainless Tefl on Braided Hose for Maximum Strength and Damping Response
F) Free-Floating 46mm Hard-Anodized Gas Piston with Wear Band and Quad Ring for Exceptional Performance and Durability
G) 7-Way Rebound Adjustable Aluminum Bypass Valve—Tunable for Street or Track
H) Ultra Light-Weight 2.5" Aluminum Top Hat
I) High-Strength .875" Nitro Steel Rod for Maximum Durability and Resistant to Extreme Side Loads
J) Monotube Design with our Exclusive 304 Stainless Seamless Tubing for Maximum Strength and Durabilty
K) 2.5" I.D. Eibach Racing Springs (ERS) — Wide Range of Optional Spring Rates (sold separately) for Street or Track Tuning
L) Lightweight Locking Aluminum Adjustment Collars to Fine Tune Ride Height and Corner Weights
M) Large 46mm Hard Anodized Linear Design Piston for Improved Heat Dissipation and Reduced Fade
N) Bronze Impregnated Wear Band with O-ring backup for Maximum Performance, Durability and Reduced STIction
O Large .500" I.D. Shim Stack for Precise Response and Adjustability
P) 7-Way Rebound Adjustable Aluminum Bypass Valve—Tunable for Street or Track
Additional Information
• MULTI-PRO-R2 Coil-Over Kit Adjustable Suspension (Set of 4 Front & Rear Coilover Springs with Adjustable Shocks)
• Suspension Drop = 0.0" - 2.0" Front - / 0.0" - 1.6" Rear • Easy Ride-Height/Corner Weight Adjustability
• Monotube Design for Maximum Street and Track Performance
• Spring Rates can be Tuned with a Wide Range of Eibach Motorsport ERS Springs (available separately)
• Precise Spherical Upper Bushing Mount
• Stainless-Steel/Teflon Braided Reservoir Lines
• Legendary Eibach Suspension Quality and Tuning
• 100% Designed and Built at Eibach U.S.A
• One—Year Warranty
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)